iPhone 6 plus lỗi camera trước 2018
step 1: Measure the resistance of sockets on voltage lines. Work if it has resistance. If not, check the wires in yellow frame on voltage lines 2v8, 1v8, 1v2.
Step 2: the double wires in yellow frame almost uncut. If it wasn’t the error of impedance, error straight to CPU A8.
step 3: Measure yellow base on sockets, if lose any bases, us zxw tracking and jumping together.
step 4: the capacitors in purple frame on voltage line were provided by source, if it shorting, will make lose power or reduce battery. The capacitors on data line, if it shorting, isolate and remove.
step 5: watch the resistance (green frame). If it error or damage by water, replace it with the same value.
Voltage 2v8 error, both camera haven’t worked, 1v8 1v2 error, lose power. In reality, the resistance in yellow frame under glue often peeling off and glimmering, easy saw when scrape, work if jump it together.
step 1: Measure the resistance of sockets on voltage lines. Work if it has resistance. If not, check the wires in yellow frame on voltage lines 2v8, 1v8, 1v2.
Step 2: the double wires in yellow frame almost uncut. If it wasn’t the error of impedance, error straight to CPU A8.
step 3: Measure yellow base on sockets, if lose any bases, us zxw tracking and jumping together.
step 4: the capacitors in purple frame on voltage line were provided by source, if it shorting, will make lose power or reduce battery. The capacitors on data line, if it shorting, isolate and remove.
step 5: watch the resistance (green frame). If it error or damage by water, replace it with the same value.
Voltage 2v8 error, both camera haven’t worked, 1v8 1v2 error, lose power. In reality, the resistance in yellow frame under glue often peeling off and glimmering, easy saw when scrape, work if jump it together.
Step 2: the double wires in yellow frame almost uncut. If it wasn’t the error of impedance, error straight to CPU A8.
step 3: Measure yellow base on sockets, if lose any bases, us zxw tracking and jumping together.
step 4: the capacitors in purple frame on voltage line were provided by source, if it shorting, will make lose power or reduce battery. The capacitors on data line, if it shorting, isolate and remove.
step 5: watch the resistance (green frame). If it error or damage by water, replace it with the same value.
Voltage 2v8 error, both camera haven’t worked, 1v8 1v2 error, lose power. In reality, the resistance in yellow frame under glue often peeling off and glimmering, easy saw when scrape, work if jump it together.