iPhone 6S chạm áp sơ cấp part 2 ICFix
Most iPhones 6S have heavily short-circuited is because of the capacitors around the BASE source or around the BASE, 2 capacitors near the wifi. If it is minor short-circuited then you can feel the heat at the red indicated IC.
1. If it short-circuited here then it is call primary short-circuited part 2.
If the orange indicated coils are hot then try to isolate this capacitors.
2. The IC Q2300 is the hottest but it does not short-circuited. Remove it and jump the wire all of the red and blue pins.
3. After jump wire the IC Q2300, detect the heat with this method: plug in the power supplier and set volt to 0, slowly increase until the amps meter rise highest and try to isolate the purple indicated capacitors or red indicated ICs that is hottest.
Most iPhones 6S have heavily short-circuited is because of the capacitors around the BASE source or around the BASE, 2 capacitors near the wifi. If it is minor short-circuited then you can feel the heat at the red indicated IC.1. If it short-circuited here then it is call primary short-circuited part 2.If the orange indicated coils are hot then try to isolate this capacitors.2. The IC Q2300 is the hottest but it does not short-circuited. Remove it and jump the wire all of the red and blue pins.3. After jump wire the IC Q2300, detect the heat with this method: plug in the power supplier and set volt to 0, slowly increase until the amps meter rise highest and try to isolate the purple indicated capacitors or red indicated ICs that is hottest.