iPhone 6S Plus tối bên phải đèn màn hình
step 1: Died 1 side of right light -> measure peak sockets, if lost anyline -> lifting wires (yellow frame) on this line. If the wire have resistance at one side and havent at the other side when measure -> measure to line.
step 2: If shorting -> isolate and remove capacitors (purple frame).
step 3: If the line to socket was good, then take a look at the pair amplified diots and wire (blue and orange frame). We have test the pair in blue frame, incase you dont need, you can isolate it if you doubt it shorting -> try to isolate diot.
step 4: Diots and wires (orange frame) are the main amplified voltage. Diot often break and shorting -> can use wire and diot of 5s 5c to replace.
step 5: take a look at the resistance (green frame), if damage by water or rotten -> replace.
step 6: replace IC light.
NOTE: the majority of problem was the wires which burn near socket ’cause glue broadside screen. On ip 6s+, IC light also easily error. 2 phones can switch or use together with 6s.
We hope to have your feedback to develop it.
step 2: If shorting -> isolate and remove capacitors (purple frame).
step 3: If the line to socket was good, then take a look at the pair amplified diots and wire (blue and orange frame). We have test the pair in blue frame, incase you dont need, you can isolate it if you doubt it shorting -> try to isolate diot.
step 4: Diots and wires (orange frame) are the main amplified voltage. Diot often break and shorting -> can use wire and diot of 5s 5c to replace.
step 5: take a look at the resistance (green frame), if damage by water or rotten -> replace.
step 6: replace IC light.
NOTE: the majority of problem was the wires which burn near socket ’cause glue broadside screen. On ip 6s+, IC light also easily error. 2 phones can switch or use together with 6s.
We hope to have your feedback to develop it.